Granite Countertops in Sunland Park, New Mexico Near El Paso

COMAF Marble & Granite Serves the Sunland Park Area from Its El Paso Facility

COMAF Marble & Granite fabricates and installs granite countertops in Sunland Park New Mexico, working from our showroom and fabrication facility at 3100 Gateway Blvd E, El Paso, TX 79905. Our service area names Sunland Park, and we hold licenses in both Texas and New Mexico. Our family-owned company has served El Paso since 1985.

Sunland Park homeowners shopping for granite need a clear answer to one question: does this company work on the New Mexico side of the state line? Yes, we do. COMAF Marble & Granite includes Sunland Park in our service area, along with Las Cruces, Santa Teresa, and the wider Borderland. Our showroom and fabrication facility sit at 3100 Gateway Blvd E, El Paso, TX 79905. We hold licenses in both Texas and New Mexico, so a Sunland Park kitchen or bathroom falls within the work we take on. Our family has cut, shaped, and set natural stone for El Paso homeowners since 1985. Granite countertops remain one of the core surfaces we fabricate and install.

We want to be straightforward about geography. Our address is in El Paso, Texas, and that Gateway Blvd E building houses both our showroom and our fabrication facility. When we talk about serving Sunland Park, we mean that Sunland Park appears by name in our service area. We do not mean that we keep an address there. That service area covers El Paso and a broad stretch of the Borderland on both sides of the state line.

Our service area includes El Paso, Las Cruces, Sunland Park, Santa Teresa, Horizon City, Socorro, Anthony, Clint, Fabens, San Elizario, Chaparral, Carlsbad, and Ruidoso. Several of those communities sit in New Mexico, and that makes our dual licensing important. We hold licenses in both Texas and New Mexico, so our team can carry a granite project from our El Paso facility to a home across the state line under the proper credentials in each state.

COMAF has stayed family-owned since 1985, and we bring more than 40 years of stone fabrication experience to every slab we cut. That history shapes how we talk with customers. We would rather explain the real differences between stones than push a homeowner toward one surface, because the right choice depends on how the person will use the room.

Granite countertops are one of our verified services, but we do not limit ourselves to granite. Our team fabricates and installs quartz, marble, quartzite, and Dekton surfaces, and we also source onyx and travertine. If you are weighing granite against quartz or quartzite for a Sunland Park remodel, we can show you all of them under one roof in El Paso. We apply the same craftsmanship to a range of projects:

• Kitchen countertops
• Bathroom countertops and bathroom vanity tops
• Shower walls
• Stone fireplace surrounds
• Custom stone dining tables

This range lets a homeowner match granite in the kitchen with a different natural stone in a bathroom, or carry one slab color from a countertop to a fireplace surround. In the next section, we explain how we source and fabricate that granite. We also explain what you can expect when you visit our El Paso showroom.

How COMAF Fabricates and Sources Granite for Borderland Customers

Distance matters when you choose a fabricator, so here are the numbers. The Sunland Park / West Side Border Area lies 13 minutes, or 10.2 miles, northwest of our El Paso facility. That short distance sits alongside the service area we already name. Sunland Park appears on our list by name, and the drive from our building to that part of the Borderland stays short.

Our granite starts in Brazil. We source all of our natural stone directly from Brazil, including the granite we cut for kitchens and bathrooms. That direct line gives us access to exotic granite and quartzite slabs that you will not find at chain stores. If you have compared granite at a big retail counter and found the same handful of colors everywhere, our Brazilian stone gives you a wider and more distinctive set of choices. Each slab carries its own veining, movement, and color, and we buy with that variety in mind.

We keep the work under our own roof. Our team handles every stage of a granite countertop project in-house, and we never hand any part of the job to subcontractors.

• Templating: our own team takes the measurements your countertops depend on.
• Fabrication: we cut and finish each slab in our own warehouse.
• Installation: the same company that templated and fabricated your stone sets it in your home.

For a homeowner, that arrangement means one company stays responsible from the first measurement to the final installation. No outside crew steps in partway through, and nobody has to pass your project from one business to another. We see that continuity as the core of our craftsmanship. The people who understand your slab are the same people who cut it and set it.

You can see the stone before you decide. Our showroom at 3100 Gateway Blvd E in El Paso lets you see and touch actual slabs before you commit to anything. We encourage you to look at the real slab instead of choosing from a small sample or a photo, because natural stone varies from one piece to the next. Both our showroom and our fabrication warehouse operate from that El Paso address. We do not run a showroom or a shop in Sunland Park, so the Gateway Blvd E building is where you will find our slabs and our fabrication work.

Our credentials match that cross-border service area. COMAF Marble & Granite holds Better Business Bureau accreditation, and we work as a licensed fabricator in both Texas and New Mexico. That dual licensing matters for granite countertop projects on the New Mexico side of the Borderland, including Sunland Park. It also matters for homeowners throughout El Paso. One licensed, in-house team can handle your project from the Gateway Blvd E warehouse to your kitchen, whichever side of the state line you live on.

Getting a Free Granite Countertop Estimate from COMAF

Every granite countertop project with us starts with a free estimate, and we charge no trip fee for it. You spend nothing to learn what your kitchen or bathroom project involves. We stand behind honest, upfront pricing, so you get a clear picture before you decide anything.

Sunland Park sits on the New Mexico side of the state line, and our El Paso facility sits on the Texas side. We hold licenses in both Texas and New Mexico. Homeowners in Sunland Park, Santa Teresa, Las Cruces, and the rest of our Borderland service area work with a licensed fabricator whichever side of the line they call home. You do not need to find one company for a Texas job and another for a New Mexico job, because our licensing covers both states.

Our showroom on Gateway Blvd E is the place to see your options in person. Our address is 3100 Gateway Blvd E, El Paso, TX 79905. At the showroom, you can see and touch actual slabs before you commit. With natural stone, a full slab tells you far more than a photo or a small sample can. You can see where the color deepens, how the pattern runs across the surface, and whether that particular piece of granite suits your space. We would rather you choose with your own eyes and hands than guess from a picture.

The path forward takes only a few steps:

• Call us to request your free estimate, with no trip fee.
• Visit our showroom at 3100 Gateway Blvd E, El Paso, TX 79905, to see and touch actual granite slabs.
• Pick the slab you want for your kitchen countertops, bathroom countertops, vanity tops, shower walls, or fireplace surround before you commit.

Bring your questions with you. If you are still weighing granite against quartz, marble, quartzite, or Dekton, we will talk through the differences in plain terms, because we fabricate and install all of them. Our family-owned team takes pride in the craftsmanship behind every countertop we set. We want you to feel confident about your stone long before installation day, whether your home sits in El Paso, Sunland Park, or elsewhere in the Borderland.

Call 915 350 8100